B26.60-6688-09
1 Shifter
2 Adjusting device (lever)
3 Bolt
4 Selection and shifting cable
5 Counterweight rod
6 Connection
7 Selector's lever
8 Adjusting device (shift)
9 Counterweight
A Reference point on the selector's lever
B Reference point on the counterweight
E Reference measurement between the selector's lever and the counterweight
Adjusting | |||
1 | Put the shifter (1) in neutral | ||
2 | Remove the vehicle's center console | ||
3 | Remove the selection and shifting cable (4) and the counterweight's rod (5) from the connection (6) | ||
4 | Place the adjusting device (2) on the shifter (1) | Remove only the nut (3) from the shifter (1). | |
| |||
5 | Place the adjusting device (8) on the shift assembly | Place the adjusting device (8) with the end (A) positioned under the shift lever (7) and the other part on the counterweight (9). | |
| |||
6 | Adjust the counterweight rod (5) as per reference established by the adjusting device (8) | Check the distance (E) between the selection and shifting lever (7) and the counterweight (9). | |
Adjusting measurement “E” of the counterweight actuation lever | |||
Adjusting nuts of the actuation rod between the counterweight and the shifting lever | |||
7 | Remove the adjusting device (8) from the gear selection and shifting lever (7) | ||
8 | Remove the adjusting device (2) from the shifter (1) | ||
9 | Perform an operation test | Shift into all gearbox gears, if necessary: | |
Carry out the adjusting procedure again. | |||
10 | Install the vehicle's center console |
Shift mechanism
Número | Denominação | Gearboxes 710.270 | |||
BE26.60-B-1009-01H | Adjustment measurement E from the counterweight actuation rod. | mm | 145 1.5 | ||
Shift mechanism
Número | Denominação | Gearboxes 710.270 | |||
BA26.60-B-1007-01K | Actuation rod adjustment nuts between the counterweight and the engaging lever. | M6 | Nm | 8 | |
979 589 00 23 00
Adjusting device