Removing and installing oil strainer

AR26.56-T-1000B

9.3.00

TRANSMISSION 714.120 /140 /690 /691 /692 in MODEL NMB613

TRANSMISSION 714.120 /140 /692 in MODEL NMB671

T26.56-0001-02

1 Spring

2 Transmission oil strainer

3 Sealing ring

4 Screw plug

T26.56-0002-02

 	Remove/install
1	Drain transmission oil
	Manual transmission - oil change	Transmission 714.690/691/692	AP26.00-T-2601A
		Transmissions 714.120/140	AP26.00-T-2601BA
2	Remove screw plug (4) and detach sealing ring (3)	 The screw plug (4) is spring-loaded.
		 Installation: the sealing ring (3) must be replaced.
			*BA26.56-N-1001-01B
			*001589672100
3	Remove transmission oil strainer (2) and spring (1) one after the other	 Mark installation position of transmission oil strainer (2).
		 Installation: Observe installation position of transmission oil strainer (2).
4	Clean all parts, check for wear and replace if necessary
5	Install in the reverse order

 Transmission oil filter

Number	Designation			Transmission 714.120	Transmission 714.140	Transmission 714.690


BA26.56-N-1001-01B	Screw plug, transmission oil strainer	M38x1.5	Nm	76	76	56
		M42x1.5	Nm	120	120	-

 Transmission oil filter

Number	Designation			Trans-mission 714.691	Trans-mission 714.692


BA26.56-N-1001-01B	Screw plug, transmission oil strainer	M38x1.5	Nm	60	60
		M42x1.5	Nm	-	-

Torque wrench

001 589 67 21 00