Detaching, attaching shift cylinder

유형 ar · 주제 26.45 · 버전 0104 · 2000-08-18

적용 대상: TRANSMISSION 711.603 /612 /620 /621 with CODE (N05) Countershaft PTO (2c) without flange with CODE (N07) PTO countershaft (2b) with flange TRANSMISSION 711.613 with CODE (N05) DB countershaft PTO (2c) with CODE (N07) Countershaft PTO (2b) with flange

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 26 수동변속기 › 26.45 보조구동장치, 동력인출장치

EinPAS 17 드라이브 트레인/액슬 › 17.35 기어 변속/기어 컨트롤 › 17.35.31 시프트 실린더/시프트 피스톤

엔진/변속기에도 적용: 711 603, 711 612, 711 613, 711 620, 711 621

AR26.45-D-0020-02A

Detaching, attaching shift cylinder

 Power take-off

Number	Designation		PTO 28-2c with output flange code N07 with transmission 711.612/613	PTO 28-2c without output flange code N05 with transmission 711.612/613	PTO 28-2b with output flange code N07 with transmission 711.620/621


BA26.45-N-1005-01A	Threaded bush in transmission housing rear section	Nm	23	23	23

 Power take-off

Number	Designation		PTO 28-2c without output flange code N05 with transmission 711.620/621


BA26.45-N-1005-01A	Threaded bush in transmission housing rear section	Nm	23

D26.45-0043-01

Removal, installation

1 Unscrew screws (2) and remove shift cylinder (1) with seal (3) and washer (4).Pay attention to tightening torque.

 Clean sealing surfaces, replace seal (3).

Installation: Recut thread of self-locking bolts (2). Replace self-locking bolts (2)

2 Reinstall in opposite order.