Adjustment values of power take-off gear set
Number | Designation | Trans-mission 711.620 with code N05 | Trans-mission 711.620/ | |
BE26.45-N-1002-01E | Axial play of power take-off drive plate | mm | 0.10 to 0.20 | 0.10 to 0.20 |
D26.45-0025-01
D26.45-0024-01
1 Measure dimension "A" from the end face of the countershaft to the retaining ring (32) ( depth gauge).
2 Measure dimension "B" from the end face of the countershaft to the bearing outer race (33).
D26.45-0027-01
D26.45-0026-01
3 Measure dimension "C" from the upper edge to the bearing seat of the bearing bore in the transmission cover.
4 Measure dimension "D" from the upper edge to the drive plate (23) in the transmission cover.
D26.45-0028-01
5 Calculation example for determining the axial play actual dimension:
Dimension "b" = 16.40 mm
- Dimension "A" = 16.30 mm
Dimension "E" = 0.10 mm
Dimension "D" = 15.00 mm
- Dimension "C" = 14.40 mm
Dimension "F" = 0,60 mm
Dimension "F" = 0,60 mm
+Dimension "E" = 0.10 mm
Actual dimension = 0.70 mm
D26.45-0029-01
Specified play = 0.10 to 0.20 mm
Actual dimension = 0.70 mm
- Permissible axial play = 0.10 mm
Shims = 0,60 mm
Adjusting disks are available in the thicknesses: 0.20; 0.30 mm.
D26.45-0030-01
6 Insert the adjusting disks (22) when installing the countershaft.