355 589 01 63 00
Counter stay
Impact extractor
Extraction claw
Internal puller
716 589 03 33 00
000 589 34 33 00
000 589 29 33 00
000 589 33 33 00
Counter stay
Internal puller
000 589 27 33 00
D26.45-1011-02
Shown on transmission 711.680
1 Unscrew bolts (1) and remove the housing cover (2).
2 Only with CODE (N07) Power take-off countershaft (2b) with flange:
Remove output shaft (4) and distance ring (3).
Shown on transmission 711.680
3 Remove washer (5) and intermediate gear (6).
4 Remove bearing (7) and washer (8).
5 Screw in a hexagon head bolt M8 approx. 2 cm in the pin (9).
6 Remove the pin (9) with extraction claw and impact extractor and unscrew hexagon head bolt again.
7 Only with CODE (N07) Power take-off countershaft (2b) with flange:
Remove bearing race (10) with internal extractor and counter stay.
D26.45-1012-03
D26.45-1013-02
Shown on transmission 711.680
8 Remove spring (11).
9 Remove shift dog (12) and sliding sleeve (14).
10 Remove shift rod (13).
D26.45-1014-01
Shown on transmission 711.680
11 Remove drive shaft (15) with drive gear (16).
12 Remove cylindrical roller bearing (17) using internal extractor and counter stay.
D26.45-1015-01
13 Press out drive shaft (15) using a suitable drift.
14 Remove bushing (19), washer (18), drive gear (16) and the needle roller bearing (20).
D26.45-1016-01
15 Only with CODE (N07) Power take-off countershaft (2b) with flange: Press tapered roller bearing (21) off output shaft (4).