000 589 34 33 00
Socket wrench
Countersupport
Internal extractor
000 589 29 33 00
711 589 00 09 00
D26.45-0050-01
1 Flip off the dummy cover (1) using a suitable screwdriver and lift off.
2 Push a bolt (M8) (2) into the open bore and screw into the female thread of the driver a few turns.
D26.45-0051-01
3 Using the bolt (2), drive out the driver (3) downwards and unscrew the bolt again.
4 Also remove the needle bearings (4 and 5) downwards.
D26.45-0052-12
5 Remove thrust washer (8), input gear (7) and shift sleeve (6) through the opening in the PTO flange.
D26.45-0053-12
6 Unscrew threaded bushing (9) using socket wrench .
7 Remove coil spring (10).
D26.45-0054-12
8 Drive shift rod (11) out from the inside of the transmission using a suitable drift.
D26.45-0055-12
9 Remove cylindrical pin (12).
10 Remove shift fork (13) towards opening in PTO flange.
D26.45-0056-01
11 Drive out dummy cover (14) upwards.
12 Remove shift lock thrust pin (15) upwards.
D26.45-0057-12
13 Drive out cylindrical roller bearing (16) through threaded bore in PTO flange (arrow) using a suitable drift.
14 Pull out outer race (18) of countershaft bearing using internal extractor and countersupport .
15 Pull out outer bearing race (17) using internal extractor and countersupport .