S22.10-4555-09
1 | Stud bolt | 2 | Screw | 3 | Engine support |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
| Remove/install | ||
1 | Remove engine stabilizer mount. | ||
2 | Support transmission with floor jack at a suitable location. | It must be possible to raise and lower the transmission adequately. | |
3 | Remove engine mount. | ||
4 | Remove stud bolt (1). | Stud bolt, carrier to transmission housing | |
5 | Lower transmission. | | |
Screw/bolts (2) must be accessible. | |||
6 | Remove screws (2). | Screw/bolt, carrier to transmission housing | |
7 | Remove engine carrier (3). | ||
8 | Install in the reverse order. |
참조 문서
- ar2210s1101ef
- ar2210s1135ef
- as0000z000901a 끼임 또는 짓눌림에 의한 상해 위험 또는 극단적인 경우 기계 장치에 손발이 절단되는 상해 위험
- as0000z001001a 리프터에서 차량이 미끄러지거나 틸팅 시 생명의 위험
- as0000z001701a 모서리가 날카로운 차량 부품에서 절단상과 찰과상으로 인한 상해 위험