P20.40-2129-05
1 Radiator retaining clips
2 Electric fan
X15 Engine fan connector/100°C temperature switch
Modification notes
| Remove/install | ||
1 | Remove intake manifold | ||
2 | Remove radiator retaining clip (1) | ||
3 | Unhook electrical fan (2) at engine radiator | Pull electrical fan (2) upwards out of guides on engine radiator. | |
Installation: Ensure correct seating of electrical fan (2) in guides on engine radiator. | |||
4 | Separate plug connection of engine fan/ 100°C temperature switch (X15) | ||
5 | Remove electric fan (2) | Push engine radiator to the rear. Pass by electrical fan (2) at first on the left at the coolant hose. | |
6 | Install in the reverse order |