P20.10-2141-09
Shown on engine 135.9 with code (I01) Air conditioning Plus (with outside temperature indicator) (FFO)
1 Coolant pump
2 Bolts
5 Poly-V-belt
6 Seal
3 Bolts
4 Belt pulley
| Remove/install | ||
Danger! | Risk of injury to skin and eyes caused by scalding from contact with hot coolant spray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses. | |
| Notes on coolant | ||
1 | Drain coolant | ||
2 | Slacken bolts (3) of belt pulley (4) | | |
3 | Remove poly-V belt (5) | ||
4 | Unscrew screws (3) of belt pulley (4) | ||
5 | Remove belt pulley (4) | ||
6 | Unscrew bolts (2) of coolant pump (1) | | |
7 | Take out coolant pump (1) toward bottom | Installation: Clean the sealing surfaces on the crankcase and on the coolant pump (1). | |
8.1 | Remove (6) gasket from coolant pump (1) and check | When reusing the removed coolant pump (1). | |
Clean sealing surfaces of the coolant pump (1). | |||
Installation: The gasket (6) is not available separately. If the gasket (6) is damaged, it must be replaced together with the coolant pump (1). | |||
9 | Install in the reverse order | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the running engine | Secure vehicle to prevent it from moving by itself. | |
10 | Conduct engine test run and check cooling system in the area of the coolant pump (1) for leaks |
Coolant pump, coolant thermostat
참조 문서
- ah2000n208001a 냉각수 지침
- ar1322p1202ff
- ar2000p1142ff
- as0000z000501a 엔진이 작동 중인 상태에서 급발진에 의한 사고 위험 시동 또는 구동 중인 엔진 근처에서 작업할 때 차량에 부딪히거나 열에 의한 상해 위험
- as2000z000101a 뜨거운 냉각수 분출 시 입은 화상에 의한 피부와 안구의 상해 위험 냉각수의 음용으로 인한 중독 위험