1 | Screw/bolt |
2 | Nut |
3 | Engine wiring harness |
4 | Electrical connection |
5 | Electrical wiring harness |
6 | Clamp |
7 | Screw/bolt |
8 | Guide tube |
S18.40-4548-06
| Remove/install | ||
1 | Remove charge air hose downstream of the charge air cooler | ||
2 | Remove screw/bolt (1) | ||
3 | Unscrew nut (2) | ||
4 | Remove wiring for electrical engine wiring harness (3) | Installation: Ensure that wiring is seated correctly. | |
5 | Unclip electrical connection (4) | ||
6 | Remove electrical wiring harness (5) | To do this remove clamp (6). | |
7 | Unscrew screw/bolt (7) | M6 | |
8 | Remove guide tube (8) upwards | Installation: Replace sealing ring. | |
9 | Install in the reverse order | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
10 | Check for leaktightness with engine running | Visual inspection only. |
참조 문서
- ar0941s8625ef
- as0000z000501a 엔진이 작동 중인 상태에서 급발진에 의한 사고 위험 시동 또는 구동 중인 엔진 근처에서 작업할 때 차량에 부딪히거나 열에 의한 상해 위험