ar1560s2712ps

Remove/install coolant temperature sensor

유형 ar · 주제 15.60 · 버전 0100 · 2018-08-15

적용 대상: Engine 642 in model 470, 471

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 15 엔진　전기장치 › 15.60 온도 센서 — 시리즈 470 · 시리즈 471

EinPAS 15 엔진 › 15.25 엔진 냉각 시스템 › 15.25.12 센서/스위치/배선 — 시리즈 470 · 시리즈 471

엔진/변속기에도 적용: 642 ***

AR15.60-S-2712PS

Remove/install coolant temperature sensor

27.07.2018

Engine

642 in model 470, 471

Remove/install coolant temperature sensor

1

Coolant temperature sensor

2

O-ring

3

Clamp

S15.60-4511-76

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Topical note

Notes on coolant

AH20.00-N-2080-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Remove clean air line.

AR09.10-S-8140PS

2

Disconnect electrical connector at coolant temperature sensor (1).

3

Remove clamp (3).

Installation: Replace clip (3).

4

Remove coolant temperature sensor (1).

Removal: Catch any leaking coolant.

Installation: Replace O-ring (2).

Assembly tool

*000589936300

5

Install in the reverse order.

6

Read out fault memory.

If the coolant temperature sensor (1) is replaced.

AD00.00-S-2000-06P

If there are faults present in the fault memory:

Erase corresponding faults.

7

Refill coolant and vent engine cooling system.

AR20.00-S-1142PS

Check

8

Check engine cooling system for leak tightness.

AR20.00-S-1011P

Remove/install coolant temperature sensor

000 589 93 63 00

Assembly tool

참조 문서