P54.18-2556-06
B Removing contact pins from connector (RK 2.5)
1 Insert release tool from the front into the contact receptacle of the connector (1).
The spring plates of the contact pin (2) are pressed together with the sleeve (4) of the tool.
2 Press the contact pin (2) out of the seat of the housing with the plunger (3) of the release tool against the spring force of the tool.
3 Remove contact pin (2) from the connector (1) by pulling slightly on the relevant cable.
Installation
Check that the contact pin (2) is properly locked in place in the housing by pulling slightly on the cable