ar1518p011502b

Removing contacts from socket

유형 ar · 주제 15.18 · 버전 0100 · 1999-10-05

적용 대상: ENGINE 668.941 in MODEL 168.007 Kupplung an Glühendstufe (N14/2) ENGINE 668.940 in MODEL 168.008 Kupplung an Glühendstufe (N14/2)'

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 15 엔진　전기장치 › 15.18 파이프　세트 — 시리즈 168 (모델 007, 008) · 시리즈 668 (모델 940, 941)

EinPAS 25 온보드 전기 시스템/네트워크/다기능 › 25.25 메인 배선 › 25.25.20 엔진 배선 — 시리즈 168 (모델 007, 008) · 시리즈 668 (모델 940, 941)

AR15.18-P-0115-02B

Removing contacts from socket

Removing contacts from socket

Release tool for SPT/JPT contacts

210 589 02 33 00

Removing contacts from socket

P54.18-2599-01

A Secondary-releasing socket

1 Use a suitable tool to press slide out of its end detent position in direction of arrow.

Do not damage seal at slide.

Removing contacts from socket

P54.18-2530-06

B Removing contacts from socket (SPT)

1 Insert release tool from the front through the openings at the contact receptacle of the socket.

The spring plates (2) of the contact socket are pressed together when this is done.

2 Remove the contacts from the socket (1) by pulling slightly on the relevant cable.

Installation

Check that the contact socket is properly locked in place in the housing by pulling slightly on the cable.

Illustration shows 4-pin SPT socket