ar1440b3010a

Remove/install pump module

유형 ar · 주제 14.40 · 버전 0103 · 2019-07-24

적용 대상: Engine 457.9 in model 634.0 with code MS5 (Euro V) with Liquid Only Engine 457.9 in model 695.023/053 with code MS5 (Euro V) with Liquid Only Engine 924.9 in model 979.0 with code MS5 (Euro V) with Liquid Only Engine 924.9, 926.9 in model 368.002/004/006/100/104/106/115/117, 382.1, 384.0/223, 685.282/284/289/290/295, 979.2 with code MS5 (Euro V) with Liquid Only Engine 924.9, 926.9 in model 958.1 with code MS5 (BlueTec 5) with Liquid Only

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 14 배기 매니폴드, 엔진 브레이크, 배기가스 정화장치 › 14.40 배기가스 후처리, AdBlue — 시리즈 368 (모델 002, 004, 006, 100, 104, 106, 115, 117) · 시리즈 382 (모델 1**) · 시리즈 384 (모델 0**, 223) · 시리즈 634 (모델 0**) · 시리즈 685 (모델 282, 284, 289, 290, 295) · 시리즈 695 (모델 023, 053) · 시리즈 958 (모델 1**) · 시리즈 979 (모델 0**, 2**)

EinPAS 15 엔진 › 15.40 배기 시스템/배기가스 후처리 시스템 › 15.40.51 펌프/정량기/노즐 — 시리즈 368 (모델 002, 004, 006, 100, 104, 106, 115, 117) · 시리즈 382 (모델 1**) · 시리즈 384 (모델 0**, 223) · 시리즈 634 (모델 0**) · 시리즈 685 (모델 282, 284, 289, 290, 295) · 시리즈 695 (모델 023, 053) · 시리즈 958 (모델 1**) · 시리즈 979 (모델 0**, 2**)

엔진/변속기에도 적용: 457 9**, 924 9**, 926 9**

AR14.40-B-3010A

Remove/install pump module

23.07.2019

Engine

457.9 in model 634.0

with code MS5 (Euro V)

with Liquid Only

Engine

457.9 in model 695.023/053

with code MS5 (Euro V)

with Liquid Only

Engine

924.9 in model 979.0

with code MS5 (Euro V)

with Liquid Only

Engine

924.9, 926.9 in model 368.002/004/006/100/104/106/115/117, 382.1, 384.0/223, 685.282/284/289/290/295, 979.2

with code MS5 (Euro V)

with Liquid Only

Engine

924.9, 926.9 in model 958.1

with code MS5 (BlueTec 5)

with Liquid Only

Remove/install pump module

1

Pump module

2

Support

3

Urea suction piping

4

Urea supply piping

5

Electric connectors

6

Exhaust gas after-treatment unit

A58

SCR command module

M25

SCR supply pump

B14.40-0167-06

Remove/install

Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

1

Turn off ignition

Notes on use, material properties and handling of AdBlue®

AH14.40-B-0001-01A

2

Separate the electrical connectors (5) of the pump module (1)


Separate electrical connectors (5) must not come in contact with urea:
This may cause damage to the harness and connected components.

3

Remove the urea suction piping (3) from the coupling nozzle

4

Remove the urea supply piping (4) from the coupling nozzle and hold it upward

Collect and dispose the drained fluid.

5

Remove the pump module (1) from the support (2)

.Pumps module in the support

*BA14.40-B-1001-02G

6

Install in reverse order

Check

7

Check the tightness in the piping junction points

Visual inspection.

Exhaust gas after-treatment

Number

Designation

Engine 457.9, 924.9, 926.9 with Liquid Only

BA14.40-B-1001-02G

Pumps module in the support

Nm

17,6

참조 문서