ar1440b2058a

Remove/install filter at inlet of pump module

유형 ar · 주제 14.40 · 버전 0103 · 2019-08-08

적용 대상: Engine 457.9 in model 634.0 with code MS5 (Euro V) with Liquid Only Engine 457.9 in model 695.023/053 with code MS5 (Euro V) with Liquid Only Engine 924.9 in model 979.0 with code MS5 (Euro V) with Liquid Only Engine 924.9, 926.9 in model 368.002/004/006/100/104/106/115/117, 382.1, 384.0/223, 685.282/284/289/290/295, 979.2 with code MS5 (Euro V) with Liquid Only Engine 924.9, 926.9 in model 958.1 with code MS5 (BlueTec 5) with Liquid Only

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 14 배기 매니폴드, 엔진 브레이크, 배기가스 정화장치 › 14.40 배기가스 후처리, AdBlue — 시리즈 368 (모델 002, 004, 006, 100, 104, 106, 115, 117) · 시리즈 382 (모델 1**) · 시리즈 384 (모델 0**, 223) · 시리즈 634 (모델 0**) · 시리즈 685 (모델 282, 284, 289, 290, 295) · 시리즈 695 (모델 023, 053) · 시리즈 958 (모델 1**) · 시리즈 979 (모델 0**, 2**)

EinPAS 15 엔진 › 15.40 배기 시스템/배기가스 후처리 시스템 › 15.40.51 펌프/정량기/노즐 — 시리즈 368 (모델 002, 004, 006, 100, 104, 106, 115, 117) · 시리즈 382 (모델 1**) · 시리즈 384 (모델 0**, 223) · 시리즈 634 (모델 0**) · 시리즈 685 (모델 282, 284, 289, 290, 295) · 시리즈 695 (모델 023, 053) · 시리즈 958 (모델 1**) · 시리즈 979 (모델 0**, 2**)

엔진/변속기에도 적용: 457 9**, 924 9**, 926 9**

AR14.40-B-2058A

Remove/install filter at inlet of pump module

23.07.2019

Engine

457.9 in model 634.0

with code MS5 (Euro V)

with Liquid Only

Engine

457.9 in model 695.023/053

with code MS5 (Euro V)

with Liquid Only

Engine

924.9 in model 979.0

with code MS5 (Euro V)

with Liquid Only

Engine

924.9, 926.9 in model 368.002/004/006/100/104/106/115/117, 382.1, 384.0/223, 685.282/284/289/290/295, 979.2

with code MS5 (Euro V)

with Liquid Only

Engine

924.9, 926.9 in model 958.1

with code MS5 (BlueTec 5)

with Liquid Only

Remove/install filter at inlet of pump module

B14.40-0166-09

1

Pump module

3

Urea suction piping

5

Filter

2

Urea supply piping

4

Urea inlet

6

Urea coupling opening

Remove/install

Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

1

Remove the urea supply pipe (2) on the pump module (1) and secure upward

Notes on use, material properties and handling of AdBlue®

AH14.40-B-0001-01A

Collect and dispose the drained fluid.

2

Remove the urea suction pipe (3) on the pump module (1) and secure upward

Collect and dispose the drained fluid.

3

Remove the urea coupling opening (6) on the pump module (1)

Small amounts of liquid may run-off.

.AdBlue coupling nozzle in the pumps module

*BA14.40-B-1004-02G

4

Remove the filter (5) of the urea inlet (4)

Use a screw (M5) to pull the filter (5) out.

Installation: Insert the filter (5) carefully in the urea inlet (4) until the boss of the filter (5) touches in a noticeable way.

5

Install in reverse order

Exhaust gas after-treatment

Number

Designation

Engine 457.9, 924.9, 926.9 with Liquid Only

BA14.40-B-1004-02G

AdBlue coupling nozzle in the pumps module

Nm

14

참조 문서