Remove/install poly-V belt · ar1322p1202mcc · Mercedes-Benz WIS

AR13.22-P-1202MCC

Remove/install poly-V belt

30.10.08

ENGINE 132.9 in MODEL 451.3 (except 451.334)

ENGINE 132.9 in MODEL 451.3 (except 451.380)

ENGINE 132.9 in MODEL 451.4 (except 451.480)

P13.22-2142-02

1 Expansion clip

2 Pin

3 Cover

P13.22-2141-06

4 Poly-V belt

5 Tensioning device

6 Locking pin

	Removing
 Danger!	Risk of injury caused by moving parts that can pinch, crush or, in extreme cases, even sever extremities	No parts of the body or limbs should be within the operating range of the mechanism when moving components.	AS00.00-Z-0009-01A
 Danger!	Risk of death caused by vehicle slipping or toppling off the lifting platform.	Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
1	Raise vehicle with vehicle lift
2	Pull out pins (2) using suitable pliers from the expansion clip (1), remove expansion clip (1) and cover (3)
3	Detention clamping device (5) using a wrench and secure using a suitable locking pin (6)	 The locking pin (6) should have a diameter of about 4 mm.
			*451589001000
4	Remove poly-V belt (4)
	Install
5	Fit on poly-V belt (4)	 Check poly-V belt (4) for wear and damage before installation and replace if necessary.
6	Detention clamping device (5) using a wrench and remove locking pin (6)		*451589001000
7	Position cover (3) and install expansion clip (1)
8	Lower vehicle with lifting platform

Wrench SW 12

451 589 00 10 00