Remove/install poly V-belt

AR13.22-D-1202NB

19.8.03

ENGINE 647.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada

ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA

ENGINE 647.981 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

D13.22-1103-11

Shown for engine without (H08) high-performance AC system code

1 Poly-V-belt

2 Tensioning pulley

3 Tensioning device

	Remove
1.1	Remove V-belt	Only with (H08) AC system code	AR13.21-D-0100NB
2	Loosen poly-V-belt (1)		AR13.22-D-3902-01NA
3	Remove poly-V belt (1) from the top	 The poly-V belt (1) must not be threaded through the fan.
	Check
4	Check poly-V belt (1) and replace if required	For typical damage patterns cf.:
		Damage patterns for poly V-belt (1)	AP13.22-D-1351-01A
	Install
5	Fit on poly V-belt (1)	 Insert poly-V belt (1) starting at the tensioning pulley (2) and the power steering pump. Refer to:
		Running diagram of poly-V-belt (1)	AR13.22-D-3902-02A
6	Tension poly V-belt (1)		AR13.22-D-3902-04NA
7.1	Install V-belt	Only with (H08) AC system code	AR13.21-D-0100NB