ar1322d1202e

Remove/install poly-V belt

유형 ar · 주제 13.22 · 버전 0107 · 2012-02-16

적용 대상: ENGINES 611.981 in MODEL 901.6, 902.6, 903.6, 904.6 ENGINES 611.983 in MODELS 690.6, 903.6, 904.6 ENGINES 611.987 in MODEL 901.6, 902.6, 903.6, 904.6 ENGINES 612.981 in MODEL 902.6, 903.6, 904.6, 905.6

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 13 공기 압축기, 벨트 드라이브 › 13.22 싱글 벨트 드라이브 — 시리즈 611 (모델 981, 983, 987) · 시리즈 690 (모델 6**) · 시리즈 901 (모델 6**) · 시리즈 902 (모델 6**) · 시리즈 903 (모델 6**) · 시리즈 904 (모델 6**) · 시리즈 905 (모델 6**)

EinPAS 15 엔진 › 15.18 벨트 드라이브 › 15.18.30 벨트/벨트 풀리/클램핑 장치/가이드 풀리 — 시리즈 611 (모델 981, 983, 987) · 시리즈 690 (모델 6**) · 시리즈 901 (모델 6**) · 시리즈 902 (모델 6**) · 시리즈 903 (모델 6**) · 시리즈 904 (모델 6**) · 시리즈 905 (모델 6**)

엔진/변속기에도 적용: 612 981

AR13.22-D-1202E

Remove/install poly-V belt

15.2.12

ENGINES 611.981 in MODEL 901.6, 902.6, 903.6, 904.6

ENGINES 611.983 in MODELS 690.6, 903.6, 904.6

ENGINES 611.987 in MODEL 901.6, 902.6, 903.6, 904.6

ENGINES 612.981 in MODEL 902.6, 903.6, 904.6, 905.6

Remove/install poly-V belt

D13.22-0002-06

Shown on engine 611

1 Poly-V belt

2 Tensioning device

3 Pin (4 mm diameter)

4 Tensioner pulley

Removing

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect ground lead from battery

Notes on battery

AH54.10-P-0001-01A

2

Loosen poly-V belt (1)

AR13.22-D-3902-01A

3

Detach poly-V belt (1)

When carrying out further operations on the engine or timing case cover, relieve pressure on tensioning device.

Inspect belt pulley sections and tensioning device for damage and dirt, replace if necessary.

Checking

4

Check poly-V-belt (1)

Check poly-V belt (1) for damage and traces of wear, replace if necessary.

Damage profiles for a poly-V belt

AP13.22-D-1351-01A

Install

5

Fit on poly-V belt (1)

Fit on poly-V belt (1), beginning at the tensioner pulley:

Routing diagram of poly-V belt

AR13.22-D-3902-02A

Single-belt drive

*BE13.22-N-1001-01A

6

Tension poly-V belt (1)

AR13.22-D-3902-04A

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

7

Connect ground lead to battery

Notes on battery

AH54.10-P-0001-01A

8

Encode radio, set clock

See owner's manual

Check values for single-belt drive

Number

Designation

Engine 611.981/
983/987 with refrigerant compressor

Engine 611.981/
983/987 without refrigerant compressor

Engine 612.981 with refrigerant compressor

Engine 612.981 without refrigerant compressor

BE13.22-N-1001-01A

Belt length

mm

2271

2196

2271

2196

참조 문서