1 | Clamps |
2 | Resonator tank |
3 | Air inlet pipe |
4 | Air compressor |
B13.10-A000-11
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | Notes on self-locking nuts and bolts | ||
| Remove/install | ||
Warning | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut. | |
1 | Tilt the cab | ||
2 | Remove the acoustic encapsulation | ||
3 | Loosen the clamps (1) | ||
4 | Remove air intake piping (3) at the resonance tank (2) | Installation: Replace the sealing rings at the air intake line. | |
5 | Loosen the fixing screw between the resonance tank (2) and air compressor (4) | ||
6 | Remove the resonance tank (2) from the compressor (4) | ||
7 | Installation in reverse order |
참조 문서
- ah0000n000101a 자가 잠금식 볼트와 너트 관련 지침
- ah0000n500001h 불순물 및 이물질에 의한 손상 방지 지침
- as6080z000101a 캡이 틸팅될 때 신체의 일부가 끼이거나 눌려서 발생하는 상해 위험