ar0941b1311i

Remove/install charge air pipe

유형 ar · 주제 09.41 · 버전 0100 · 2016-02-12

적용 대상: Cumbustion engine 372, 374, 376, 377 with Vehicle 364, 382, 384, 386, 682, 688, 693, 694, 695

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 09 공기흡입, 차징 › 09.41 차지 에어 튜브/차지에어 냉각장치 — 시리즈 364 · 시리즈 372 · 시리즈 374 · 시리즈 376 · 시리즈 382 · 시리즈 384 · 시리즈 386 · 시리즈 682 · 시리즈 688 · 시리즈 693 · 시리즈 694 · 시리즈 695

EinPAS 15 엔진 › 15.30 흡기/충전 › 15.30.33 흡기 매니폴드/급기 매니폴드 — 시리즈 364 · 시리즈 372 · 시리즈 374 · 시리즈 376 · 시리즈 382 · 시리즈 384 · 시리즈 386 · 시리즈 682 · 시리즈 688 · 시리즈 693 · 시리즈 694 · 시리즈 695

엔진/변속기에도 적용: 377 ***

AR09.41-B-1311I

Remove/install charge air pipe

12.02.16

Cumbustion engine 372, 374, 376, 377 with Vehicle 364, 382, 384, 386, 682, 688, 693, 694, 695

Remove/install charge air pipe

B09.41-0016-08

1 Pipe from turbocharger to charge-air cooler

2 turbocharger

3 Clamp with internal channel

4 Red color flexible hose

5 Charge-air cooler pipe

6 Bracket fastening bolt

7 Pipe fitting opening

8 Sealing ring

Remove and install

Danger!

Risk of accidents due to vehicle moving when the engine is started. Risk of injuries by pinching or suffer burns when working while the engine started or when the vehicle is moving

Assure vehicle against unintentional move. Use tight fitting and closed work clothes. Do not touch heated or running parts.

AS00.00-B-0005-01A

1

Disconnect the battery lead

Unscrew the negative lead bolt at the side rail, avoid removal at battery post terminals.

2

Tilt the cab.

AR60.80-B-0010A

3

Loosen the two of the red color flexible hose (4)

Installing: Check the clamps and the flexible pipe (red color) and clamps for condition, should it be necessary, replace them.

4

Remove the bolt (6) with the nut and washer from the pipe fastening bracket

*BA09.41-B-1001-01A

5

Loosen and remove the clamp with internal channel (3) at the outlet of the turbocharger (2)

Installing: Check the clamp for condition, should it be necessary, replace them.

6

Remove the pipe (1) from the turbocharger

Be careful so no object falls inside the turbocharger, close the outlet with a suitable plug.

7

Remove the sealing ring (8) from the fitting opening (7) of the pipe

Installing: Install a new sealing ring lubricated with neutral petroleum jelly.

*BR00.45-B-1001-06A

Before installing the pipe, check the inside walls for cleaning.

8

Install in reverse order

9

Run the engine and check for eventual leaks

Charge air pipe/charge air cooling

Número

Denominação

Engine 372.9; 374.9; 376.9 except for gas engines

BA09.41-B-1001-01A

Fastening of the clamps on the inlet and outlet flexible hoses

Nm

10

Produtos para reparos

Número

Denominação

Número de pedido

BR00.45-B-1001-06A

Vaseline

-

참조 문서