ar0920d131006b

Removing and installing vacuum lines on intake manifold

유형 ar · 주제 09.20 · 버전 0100 · 2000-02-24

적용 대상: ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 09 공기흡입, 차징 › 09.20 흡기 매니폴드, 흡기 매니폴드 예열 — 시리즈 901 (모델 6**) · 시리즈 902 (모델 6**) · 시리즈 903 (모델 6**) · 시리즈 904 (모델 6**)

EinPAS 15 엔진 › 15.30 흡기/충전 › 15.30.32 라인/호스/밸브 — 시리즈 901 (모델 6**) · 시리즈 902 (모델 6**) · 시리즈 903 (모델 6**) · 시리즈 904 (모델 6**)

엔진/변속기에도 적용: 111 984

AR09.20-D-1310-06B

Removing and installing vacuum lines on intake manifold

Intake manifold, intake manifold preheater

Number

Designation

Engine 111.979/
984

BA09.20-N-1004-02A

Vacuum line to vacuum connection of intake manifold

Nm

30

Removing and installing vacuum lines on intake manifold

D09.20-0016-01

1 Detach vacuum line (2) from intake manifold and place lines to the side.

2 Detach vacuum line (3) of brake booster from intake manifold.

The vacuum line (1) of the diaphragm pressure regulator can remain connected.

Pay attention to tightening torque of vacuum line (3).

Removing and installing vacuum lines on intake manifold

D09.20-0017-01

3 Take off fixture (arrow) of the vacuum line (4) coming from the air intake hose, at the intake manifold, and place line to the side together with the vacuum line of the brake booster.

4 Fit on in the reverse order.