1 | Screw/bolt |
2 | Electrical connection |
3 | Air intake pipe |
4 | Engine air intake duct |
5 | Screw/bolt |
B2/16 | Hot film mass air flow sensor |
S09.10-4523-06
| Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Remove screw/bolt (1) | ||
2 | Disconnect electrical connection (2) | ||
3 | Remove air intake pipe (3) | Installation: Check clamp; replace as required. | |
4 | Remove engine air intake duct (4) together with hot film mass air flow sensor (B2/16) | ||
5 | Remove screw/bolts (5) | Installation: Check sealing rings for hot film MAF sensor (B2/16); replace as required. | |
6 | Install in the reverse order | ||
| Check | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
7 | Check for leaktightness with engine running | Visual inspection only. |
참조 문서
- ah0000p500001a 불순물 및 이물질에 의한 손상 방지 지침
- as0000z000501a 엔진이 작동 중인 상태에서 급발진에 의한 사고 위험 시동 또는 구동 중인 엔진 근처에서 작업할 때 차량에 부딪히거나 열에 의한 상해 위험