ar0752s5303a

Remove/install heated O2sensor

유형 ar · 주제 07.52 · 버전 0202 · 2012-02-16

적용 대상: ENGINE 111 in MODEL 638

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 07 혼합물 처리 › 07.52 가솔린-분사 및 점화장치 PMS — 시리즈 638

EinPAS 15 엔진 › 15.45 엔진 매니지먼트 › 15.45.12 센서/스위치/배선 — 시리즈 638

엔진/변속기에도 적용: 111 ***

AR07.52-S-5303A

Remove/install heated O2sensor

14.2.12

ENGINE 111 in MODEL 638

Remove/install heated O2sensor

S07.52-1009-06

1 Plug connection

R22 Heated O2 sensor,

Modification notes

24.10.03

Risk of death.Death may result if vehicle slips or topples from the lifting platform, notes on safety included for the first time.

24.10.03

Risk of injury to skin and eyes from handling hot or glowing objects, notes on safety included for the first time

24.10.03

Risk of explosion caused by explosive gas. Risk of poisoning and causticization from swallowing battery acid, notes on safety included for the first time

Remove/Install

Danger!

Risk of injury to skin and eyes from handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Danger!

Risk of explosion caused by explosive gas. Risk of poisoning and caustic burns caused by swallowing battery electrolyte. Risk of injury caused by burns to skin and eyes from battery acid or when handling damaged lead-acid batteries

No fire, sparks, open flames or smoking. Wear protective gloves, acid-resistant clothing and safety glasses. Pour battery electrolyte only into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect ground cable from battery

See

Remove/install battery

AR54.10-S-0005A

Notes on battery

AH54.10-P-0001-01A

2

Unclip catch (arrow) and disconnect connector (1) of heated O2sensor (R22)

Danger!

Risk of death cased by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

3

Raise vehicle with lifting platform

AH00.60-N-0100-01A

4

Unscrew heated O2sensor (R22)

Apply heat-resistant lubricant to thread of heated O2sensor.

*BR00.45-Z-1005-06A

Box wrench bit, Delco R4 and A6

*000589710300

*BA14.00-N-1001-01A

5

Check lambda control

Refer to ENGINE DM

6

Install in the reverse order

7

Read out fault memory of PEC control unit, erase if required

Refer to ENGINE DM

O2 sensor

Number

Designation

Engine
111

BA14.00-N-1001-01A

Heated O2 probe to exhaust manifold

Nm

55

Remove/install heated O2sensor

000 589 71 03 00

Ring wrench socket

Repair materials

Number

Designation

Order number

BR00.45-Z-1005-06A

Paste, hot lubrication 1 kg, DB supply specification 6879.20

A 000 989 76 51

참조 문서