S07.16-A020-78
1 | Coolant temperature sensor | 3 | Securing clamp | 5 | Thermostat housing | ||
2 | Electrical connector | 4 | Sealing ring |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Warning | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Drain off coolant. | ||
2 | Remove air intake pipe. | ||
3 | Disconnect electrical connection (2). | ||
4 | Remove the securing clamp (3). | ||
5 | Remove the coolant temperature sensor (1) from the thermostat housing (5). | Collect any escaping coolant in a suitable container. | |
Installation: Check the sealing ring (4) for damage. | |||
If there is a problem with the sealing ring (4), | |||
| |||
replace the coolant temperature sensor (1). | |||
6 | Install in the reverse order. | ||
7 | Read out and delete fault memory. | If the coolant temperature sensor (1) has been replaced. | |
|
참조 문서
- ad0000s200004e
- ah5400p000101a 정전기 방전으로 인한 전자 부품 손상 방지 지침
- ar0910s8131ea
- ar2000s1142e
- as0000z000201a 뜨겁거나 달아오른 물체를 취급할 때 피부와 눈에 입을 수 있는 상해 위험
- as2000z000101a 뜨거운 냉각수 분출 시 입은 화상에 의한 피부와 안구의 상해 위험 냉각수의 음용으로 인한 중독 위험