Remove/install MR/PLD injection lines

AR07.15-D-9235AD

Remove/install MR/PLD injection lines

16.8.06



Removing

1

Remove service cover

2

Remove engine trim panel (2)

 Danger!

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel.

No fire, sparks, open flames or smoking.
Only pour fuels into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

3

Remove injection line (1)



*000589070300



*000589680300



Install

 Danger!

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel.

No fire, sparks, open flames or smoking.
Only pour fuels into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

4

Install injection lines (1)

 Do not bend injection lines (1).



*BA07.15-N-1004-01A



*000589070300



*000589680300

 Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

5

Conduct engine test run, stop engine and check in area of injection lines (1) for leaks

 Crank engine with starter for maximum 90 seconds. Wait at least for about 2 minutes before repeating attempt at starting.

The fuel system is bled automatically.

6

Install engine cover (2) and maintenance hood

Number

Designation

Engine
900.9,

Engine
902.9
without code MS8

BA07.15-N-1004-01A

Injection line to pressure pipe connection and unit pump

Nm

35