Checking start of delivery (RIV method positional transmitter)

AR07.11-D-8240B

10.2.96

ENGINE 601.943 in MODEL 901, 902, 903, 904

D07.11-0008-06

D07.11-0001-06

1 Position sensor

2 Battery

3 Injection pump

4 Seal

5 Screw plug

 	Removing, installing
1	Open maintenance flap		AR88.40-D-3000A
2	Remove screw plug (5) from the injection pump and take off together with seal (4)	Collect oil which flows out in a suitable vessel  Installing: replace seal, check engine oil level, adjust to correct level if necessary	*BA07.11-N-1009-01A
3	Screw position sensor (1) into governor housing of injection pump (3)	 During this step, ensure that the guide pin (arrow) is facing up
4	Install position sensor (1)	Connect battery terminal to battery positive
			*617589082100
	Inspecting
5	Rotate crankshaft by hand	Only in direction of rotation until lamp "B" comes on. Carefully rotate further until both lamps "A+B" come on	*BE07.11-N-1001-01A
6	Read off RI value (indirect start of delivery) on scale (6)	If the specification is not achieved, set start of delivery	AR07.11-D-8301B
7	Install in the reverse order

Test and setting data for inline pump with mechanical control

 Diesel injection system – general

Number	Designation		Engine 601.943


BA07.11-N-1009-01A	Screw plug to governor housing	Nm	30

617 589 08 21 00

Position sensor