AR07.09-D-0001WE | Remove/install vacuum reservoir | 24.2.12 |
ENGINES 651 in MODEL 900
ENGINES 651.955 /957 in MODEL 906
D07.09-0001-06
Shown on vehicle up to 31.8.10 and without code (MS3) Emissions level Euro 3
1 Vacuum reservoir
2 Connections
3 Screw/bolts
4 Vacuum hose
5 Vacuum hoses
Modification notes
| Remove/install | ||
1 | Detach vacuum hose (4) at vacuum reservoir (1) | Installation: Check vacuum hose (4) for damage; replace if necessary. | |
2 | Mark vacuum hoses (5) relative to connectors (2) | ||
3 | Remove vacuum hoses (5) from connectors (2) | For vehicles with code (MS3) Emissions level Euro 3 a plug is installed on the center connector (2) which does not need to be removed. | |
Installation: Check vacuum hoses (5) for damage; replace if necessary. Wet vacuum hoses (5) with lubricant. | |||
Antifriction agent | |||
4 | Remove screws/bolts (3) | Installation: For vehicles as of 1.9.10 or with code (MS3) Emissions level Euro 3 the oil dipstick guide tube is also fastened using the front screw/bolt (3). | |
| |||
5 | Remove vacuum reservoir (1) | ||
6 | Detach plug from center connector (2) | When replacing the vacuum reservoir (1) for code (MS3) Emissions level Euro 3. | |
7 | Install in the reverse order |
Vacuum system
Number | Designation | Engine | ||
BA07.09-N-1001-01A | Screw/bolt, vacuum reservoir to bracket | Nm | 8 | |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1010-06A | Lubricant, rubber assembly 1 l | A 000 989 03 67 |