S07.08-A025-79
1 | Diesel injection system control unit | 3 | Bolts | ||||
2 | Electrical connectors | 4 | Seal |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Connect vehicle diagnosis system and carry out initial startup of the diesel injection system control unit (1). | When replacing the diesel injection system control unit (1). | |
| |||
2 | Disconnect ground line from battery. | ||
3 | Remove engine cover. | ||
4 | Release and disconnect electrical connectors (2). | ||
5 | Remove screw/bolts (3). | Screw, diesel injection system control unit to air filter housing | |
6 | Remove diesel injection system control unit (1). | ||
| Check | ||
7 | Check seal (4) for damage. | If damage is identified, | |
| |||
Install new seal (4). | |||
8 | Install in the reverse order | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
9 | Perform an engine test run and check the engine for proper function. |
참조 문서
- ad0000s200004e
- ah0000p500001a 불순물 및 이물질에 의한 손상 방지 지침
- ah5400p000101a 정전기 방전으로 인한 전자 부품 손상 방지 지침
- ar0110s2405ea
- ar5410s0003e
- ar5410s0003e
- as0000z000501a 엔진이 작동 중인 상태에서 급발진에 의한 사고 위험 시동 또는 구동 중인 엔진 근처에서 작업할 때 차량에 부딪히거나 열에 의한 상해 위험