P07.08-2078-08
1a Right control unit bracket
1b Left control unit bracket
N3/10 ME-SFI [ME] control unit
2 Ball head support
| Remove/install | ||
| Notes on avoiding damage to ignition system | ||
1 | Read out version coding of the ME-SFI [ME] control unit (N3/10) | When replacing ME-SFI [ME] control unit (N3/10) | |
Connect up STAR DIAGNOSIS and read in data from ME-SFI [ME] control unit (N3/10) into STAR DIAGNOSIS. | |||
Installation: Transfer stored data to the new ME-SFI [ME] control unit (N3/10). | |||
2 | Turn key in ignition lock (electronic ignition switch control unit) to position "0" | When ME-SFI [ME] control unit (N3/10) is reused. | |
3 | Open engine hood and raise to vertical position | ||
4 | Remove air filter housing | ||
5 | Move shift interlocks of electrical connectors at ME-SFI [ME] control unit (N3/10) in direction of arrow, and disconnect electrical connectors from ME-SFI [ME] control unit (N3/10) | ||
6 | Pull ME-SFI [ME] control unit (N3/10) upwards out of control unit brackets (1a, 1b) | ||
7 | Detach ball-type support braces (2) from ME-SFI [ME] control unit (N3/10) | If replacing the ME-SFI control unit (N3/10). | |
| |||
8 | Remove control unit brackets (1a, 1b) from resonance intake manifold as needed | | |
9 | Install in the reverse order | ||
10 | Perform sensor rotor adaptation using STAR DIAGNOSIS | If replacing the ME-SFI control unit (N3/10). | |
Menu guidance: Engine control module Adaptations Learning processes | |||
11 | Release transport protection on ME-SFI [ME] control unit (N3/10) | If replacing the ME-SFI control unit (N3/10). | |
12 | Personalize and activate ME-SFI [ME] control unit (N3/10) | If replacing the ME-SFI control unit (N3/10). | |
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
13 | Carry out engine test run | If replacing the ME-SFI control unit (N3/10). |
Control unit
참조 문서
- ah1510p000201v 점화장치 손상 방지 지침
- ar0910p1150va
- ar8840p1000v 엔진 후드 열기, 수직으로 세우고, 닫기
- as0000z000501a 엔진이 작동 중인 상태에서 급발진에 의한 사고 위험 시동 또는 구동 중인 엔진 근처에서 작업할 때 차량에 부딪히거나 열에 의한 상해 위험