ar0704w0090a

Remove/install gas pressure sensor

유형 ar · 주제 07.04 · 버전 0200 · 2011-01-11

적용 대상: ENGINES 902.9, 906.9 in MODEL 957 with CODE (MS8) natural gas engine

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 07 혼합물 처리 › 07.04 센서부재, 센서, 센서들 — 시리즈 902 (모델 9**) · 시리즈 906 (모델 9**) · 시리즈 957

EinPAS 15 엔진 › 15.45 엔진 매니지먼트 › 15.45.12 센서/스위치/배선 — 시리즈 902 (모델 9**) · 시리즈 906 (모델 9**) · 시리즈 957

AR07.04-W-0090A

Remove/install gas pressure sensor

9.12.10

ENGINES 902.9, 906.9 in MODEL 957 with CODE (MS8) natural gas engine

Remove/install gas pressure sensor

W07.04-1060-11

1 Electrical connector

B109 Gas pressure sensor

Modification notes

2.12.10

Repair materials - added.

Operation step 6

*BR00.45-Z-1054-01A

Check the gas system for leaktightness in accordance with the national regulations - added.

Step 8

Remove

Danger!

Risk of explosion caused by escaping natural gas or by overheated compressed-gas tanks when working on natural gas powered vehicles. Risk of frostbite to parts of the body caused by escaping natural gas and by touching components near the valves when emptying compressed-gas tanks. Risk of poisoning or risk of suffocation caused by inhaling natural gas.

Remove any sources of ignition.

Ensure that work area is adequately ventilated.

Wear heat protective gloves.

AS00.00-Z-0018-01A

Notes on work safety regulations for vehicles with natural gas-powered engines

AH00.10-N-1000-04A

1

Close gas shutoff valves at compressed-gas tanks

AR47.10-W-0005H

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

2

Start engine and run on idle until the engine goes off by itself

In this way residual gas is used up in the lines and components.

3

Switch off ignition

4

Disconnect electrical connector (1) from gas pressure sensor (B109)

5

Remove gas pressure sensor (B109)

Install

6

Install gas pressure sensor (B109)

Replace thread sealant on gas pressure sensor (B109).

*BR00.45-Z-1054-01A

*BA07.54-N-1016-01A

7

Connect electrical connector (1) to gas pressure sensor (B109)

8

Check gas system for leaktightness in accordance with the national regulations

In Germany the GAP is performed according to §41a of the German vehicle licensing regulations.

Gas injection and ignition system

Number

Designation

Engine
902.9
with code MS8,

Engine 906.9 with code MS8

BA07.54-N-1016-01A

Gas pressure sensor on gas pressure line

Nm

25

Repair materials

Number

Designation

Order number

BR00.45-Z-1054-01A

PTFE thread sealing tape

B.E.S.T. Fluidsysteme GmbH Düsseldorf
An der Gümpgesbrücke 26
41564 Kaarst-Holzbüttgen
Germany
Tel. +49-2131-124783-0
Fax. +49-2131-666523
www.swagelok.de

참조 문서