S07.04-4716-08
1 | Electrical connector | 3 | Electrical line | |
2 | Bracket | 4 | Oxygen sensor downstream of catalytic converter |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Topical note | Special instructions for lifting and supporting vehicle | ||
| Remove/install | ||
1 | Raise vehicle | ||
2 | remove electrical connection (1) from bracket (2) | ||
3 | Disconnect electrical connection (1) | ||
4 | Remove electric line (3) from holder (2) | ||
5 | Remove lambda sensor downstream of catalytic converter (4) | Installation: Apply heat-resistant lubricating paste to thread of lambda sensor downstream of catalytic converter (4). | |
Paste, hot lubrication 1 kg, DBL 6879.20 | |||
Oxygen sensor downstream of catalytic converter at exhaust pipe | |||
Tool kit | |||
Torque wrench | |||
6 | Cover the sensor tip of the lambda sensor downstream of catalytic converter (4) with a clean protective cover | If the lambda sensor downstream of catalytic converter (4) is to be reused. | |
Set of protective caps | |||
7 | Install in the reverse order | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
8 | Check leaktightness of exhaust system when engine is running | Visual inspection only. |
001 589 66 21 00
Torque wrench
000 589 10 99 00
Tool kit
001 589 00 91 00
Set of protective caps
참조 문서
- ah0060n010001p 차량을 들어 올리고 정비대 위에 올려 놓는 작업 관련 지침
- ar0060s100004p
- as0000z000201a 뜨겁거나 달아오른 물체를 취급할 때 피부와 눈에 입을 수 있는 상해 위험
- as0000z000501a 엔진이 작동 중인 상태에서 급발진에 의한 사고 위험 시동 또는 구동 중인 엔진 근처에서 작업할 때 차량에 부딪히거나 열에 의한 상해 위험
- as0000z001001a 리프터에서 차량이 미끄러지거나 틸팅 시 생명의 위험
- as4900z000101a 배기가스 라인과 이와 연결된 부품에서 작업 시 입을 수 있는 화상, 질식, 중독 위험。가스 또는 가루 형태의 배기 가스 성분을 흡입함으로 인해 발생할 수 있는 질식 및 중독 위험�