Remove/install solenoid camshaft

AR05.20-P-7295VA

Remove/install solenoid camshaft

14.8.08

17.7.08

Remove exhaust camshaft Hall sensor - added

Step 5.2

 

Remove/install

1

Remove left engine intake air duct and front engine cover

Removal Intake camshaft solenoid (Y49/4)

2

Remove intake camshaft Hall sensor (B6/4)



*BA15.10-P-1002-03E

3

Release and disconnect electrical connector on solenoid (Y49/4)

4

Remove bolts (1) and solenoid (Y49/4) from front cover

 Installation: Replace sealing ring.

 Installation: Tighten to indicated torque using an insert box wrench Hazet 6609 c-E8.



*BA15.10-P-1003-03E

Removal of exhaust camshaft solenoid (Y49/6)

5.1

Remove expansion reservoir (3)

Vehicles up to including 31.01.2006

AR46.25-P-1000VA

5.2

Remove exhaust camshaft Hall sensor (B6/6)

Vehicles as of 01.02.2006



*BA15.10-P-1002-03E

6

Release and disconnect electrical connector on solenoid (Y49/6)

7

Remove bolts (2) and solenoid (Y49/6) from front cover

 Installation: Replace sealing ring.

 Installation: Tighten to indicated torque using an insert box wrench Hazet 6609 c-E8.



*BA15.10-P-1003-03E

8

Install in the reverse order



Checking

 Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

9

Conduct engine test run and check engine for leaks

Number

Designation

Engine
272

BA15.10-P-1002-03E

Bolt, camshaft Hall sensor to front cover on cylinder head

Nm

8

BA15.10-P-1003-03E

Bolt, camshaft solenoid to front cover
to cylinder head

Nm

8