AR05.20-B-6010B | Check basic position of camshafts | 12.02.16 |
Cumbustion engine 612 with Vehicle 979.013, 979.016
D05.20-1101-06
1 Intake valve camshaft
2 Exhaust valve camshaft
3 Locking pins
A Hole
B Adjusting holes
| Remove and install | ||
1 | Removing the cylinder head cover | ||
2 | Place the first cylinder piston in the combustion TDC. | Rotate the engine by its crankshaft in the engine operating direction (clockwise).Do not rotate the engine by the camshaft nor counterclockwise. | |
3 | Lock the intake valve camshaft with the locking pin (3). | Locking pins | |
Insert the locking pin (3) in the intake valve camshaft gear through the hole (A) in the first camshaft bearing cap. | |||
| Check | ||
4 | Check the basic position of the camshafts. | The holes (B) of the camshaft gears (1, 2) will have to be aligned, as well as, the markings on the camshafts and of the bearing caps (arrows). If necessary | |
Correct the basic position of the camshafts. | |||
5 | Install in reverse order. |
111 589 03 15 00
Locking pins