654 589 00 33 00
Rivet press tool
All individual tools that are listed in the repair description are part of the rivet press tool.
1 | Align gauge (L) in position 1 (P1) and tighten. |
Ensure that the alignment of the gauge (L) and timing chain is correct. |
The positions (P1) of the gauge (L) must match the bores on the cylinder head. |
The bolt (arrow) must match the semi-circular cutout of the gauge (L) in the center at the top. |
2 | Remove gauge (L). |
P05.10-2617-12
3 | Attach removal guide (1a) with end-to-end hole to the rivet press tool (1) and tighten. |
4 | Turn back spindle (3) completely. |
5 | Attach thrust piece (1c) to the rivet press tool (1). |
Thrust piece (1c) serves as guide for removal pin (1b). |
6 | Insert removal pin (1b) on the rivet press tool (1) from rear to front. |
P05.10-2610-06
7 | Attach rivet press tool (1) to the cylinder head and tighten with screws (1s). |
8 | Screw in spindle (3) up to the end stop. |
At the same time, the bolt is pushed out and secured against falling by a magnet. |
9 | Remove rivet press tool (1). |
P05.10-2614-05
10 | Turn back spindle (3) completely. |
11 | Remove the removal pin (1b), thrust piece (1c), removal guide (1a), and the bolt from the rivet press tool (1). |
P05.10-2610-06