ar0510d8484c

Removing and installing slide rail in timing case cover

유형 ar · 주제 05.10 · 버전 0101 · 2000-02-15

적용 대상: ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0 ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 05 엔진제어장치 › 05.10 타이밍체인 구동장치, 톱니벨트 구동장치 — 시리즈 901 (모델 0**, 6**) · 시리즈 902 (모델 0**, 6**) · 시리즈 903 (모델 0**, 6**) · 시리즈 904 (모델 0**, 6**)

EinPAS 15 엔진 › 15.17 엔진 컨트롤 › 15.17.34 체인 드라이브/톱니 벨트/기어 휠 드라이브 — 시리즈 901 (모델 0**, 6**) · 시리즈 902 (모델 0**, 6**) · 시리즈 903 (모델 0**, 6**) · 시리즈 904 (모델 0**, 6**)

엔진/변속기에도 적용: 111 979, 111 984

AR05.10-D-8484C

Removing and installing slide rail in timing case cover

14.2.96

ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0

ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6

Removing and installing slide rail in timing case cover

D05.10-1003-06

1 Timing case cover

2 Slide rail

3 Bearing pin

Removing, installing

1

Remove timing case cover (1)

Do not damage oil pan gasket, take off timing case cover (1) carefully, replace oil pan gasket if necessary:

AR01.40-D-8000C

Remove oil pan.

AR01.45-D-7500C

2

Pull tensioning rail (2) off bearing pin (3)

The plastic guide of the tensioning rail (2) is clipped in place and can be replaced separately.

Running diagram of timing chain.

AR05.10-D-8127-01C

3

Install in the reverse order

The chain tensioner must be disassembled before being installed, moved into its basic position and then installed.

참조 문서