Removing and installing slide rail in cylinder head

AR05.10-D-8432C

14.2.96

ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0

ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6

D05.10-1001-06

1 Slide rail

2 Bolts+washers

3 Chain tensioner

4 Front cover

	Removing
1	Remove cylinder head cover		AR01.20-D-5014C
2	Remove front cover (1) at cylinder head		AR01.30-D-5700C
3	Remove chain tensioner (3)		AR05.10-D-7800C
4	Unscrew two bolts (2) and take off slide rail (4) at cylinder head	 The plastic guide of the slide rail (4) is clipped in place and can be replaced separately.
	Installing
5	Fit on slide rail at cylinder head		*BA05.10-N-1003-01A
6	Install chain tensioner		AR05.10-D-7800-02C
			*BA05.10-N-1001-01A
			*BA05.10-N-1002-01A
7	Install front cover at cylinder head		AR01.30-D-5700C
8	Install cylinder head cover		AR01.20-D-5014C
			*BA01.20-N-1001-01A

 Crankcase ventilation, cylinder head cover

Number	Designation		Engine 111.948/ 978/979/ 984


BA01.20-N-1001-01A	Bolt of cylinder head cover to cylinder head	Nm	9

 Timing chain drive

Number	Designation			Engine 111.979/ 984


BA05.10-N-1001-01A	End piece in chain tensioner housing		Nm	40
BA05.10-N-1002-01A	Chain tensioner housing in timing case cover		Nm	80
BA05.10-N-1003-01A	Top slide rail to cylinder head	M6	Nm	9