시리즈
ko
ar0500b5541b
Disassemble, assemble rocker arm unit
유형 ar · 주제 05.00 · 버전 0101 · 2019-10-30
적용 대상: Engine 904.9, 906.9, 924.9, 926.9 in model 368.0/1, 382.1, 384.06/07, 634.0, 685.282/284/289/290, 979.2
“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.
위치
기능 그룹 1 엔진 › 05 엔진제어장치 › 05.00 서문 — 시리즈 368 (모델 0**, 1**) · 시리즈 382 (모델 1**) · 시리즈 384 (모델 06*, 07*) · 시리즈 634 (모델 0**) · 시리즈 685 (모델 282, 284, 289, 290) · 시리즈 904 (모델 9**) · 시리즈 906 (모델 9**) · 시리즈 979 (모델 2**)
EinPAS 15 엔진 › 15.17 엔진 컨트롤 › 15.17.30 밸브 드라이브 — 시리즈 368 (모델 0**, 1**) · 시리즈 382 (모델 1**) · 시리즈 384 (모델 06*, 07*) · 시리즈 634 (모델 0**) · 시리즈 685 (모델 282, 284, 289, 290) · 시리즈 904 (모델 9**) · 시리즈 906 (모델 9**) · 시리즈 979 (모델 2**)
엔진/변속기에도 적용: 924 9**, 926 9**
AR05.00-B-5541B
Disassemble, assemble rocker arm unit
14.10.2019
Engine
904.9, 906.9, 924.9, 926.9 in model 368.0/1, 382.1, 384.06/07, 634.0, 685.282/284/289/290, 979.2
1
Lock-ring
8
Rocker shaft
2
Front holder (external)
9
Bolt
3
Inner holders
10
Tensioner
4
Rear rack (external)
5
Intake valves rocker arms
A
Instalation measurement 122 mm
6
Exhaust valves rocker arms
B
Instalation measurement 110 mm
Remove
1
Remove the rocker mechanism
.
AR05.00-B-5521A
Disassemble
2
Remove the locking rings (1) from the axle (8)
3
Remove the axle (8), brackets (2/3/4), rocker arms (5/6) and springs (7)
Check
4
Verify the locking rings status, brackets, springs, axle and rocker arms
In case of damage and/or wear, replace.
.Inside diameter of bushing installed in the rocker arm (final finish)
*BE05.30-B-1001-04C
.Diameter of rocker arm shaft
*BE05.30-B-1002-04C
Assemble
5
Install a locking ring in one of the axle ends (8)
6
Install in the axle (8) the brackets (2/3/4), rocker arms (5/6), springs (7) and another locking ring (1)
Observe the instalation position and sequence (figure) and the reach for the instalaion measures (A/B). A = 122mm / B = 110mm Fix the brackets (2/3/4) in the axle (8), with bolts (9) and turnbuckle parts (10).
Install
7
Install the rocker arms device
.
AR05.00-B-5521A
Number
Designation
Engine 904.9, 906.9
Engine 924.9, 926.9
BE05.30-B-1001-04C
Inside diameter of bushing installed in the rocker arm (final finish)
mm
22,000...22,021
22,000...22,021
Number
Designation
Engine 904.9, 906.9
Engine 924.9, 926.9
BE05.30-B-1002-04C
Diameter of rocker arm shaft
mm
21,967...21,980
21,967...21,980
참조 문서