ar0330s5000e

Remove/install retaining lock for crankshaft/ring gear

유형 ar · 주제 03.30 · 버전 0101 · 2015-04-02

적용 대상: MODEL 447 with ENGINE 651

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 03 파워트레인 › 03.30 플라이휠, 드라이버 디스크, 진동댐퍼, 플라이휠 링기어 — 시리즈 447 · 시리즈 651

EinPAS 15 엔진 › 15.15 연소 엔진 전체/엔진 블럭/크랭크 어셈블리 › 15.15.41 크랭크샤프트/플라이휠/클러치 디스크 — 시리즈 447 · 시리즈 651

AR03.30-S-5000E

Remove/install retaining lock for crankshaft/ring gear

18.2.15

MODEL

447 with ENGINE 651

Remove/install retaining lock for crankshaft/ring gear

1	Retaining lock

S03.30-4509-11

	Remove
1	Remove starter from engine and place to one side	MODEL 447 with ENGINE 651 without CODE ZG2 (Permanent all-wheel drive)	AR15.30-S-7100E
		MODEL 447 with ENGINE 651 with CODE ZG2 (Permanent all-wheel drive)	AR15.30-S-7100EA
		 Do not remove electrical lines.
	Install
2	Insert retaining lock (1) into starter opening	 For better engagement turn engine at the crankshaft as required.
		 Counterholder	*651589074000
		 Counterholder	*651589004000
		 Retaining lock	*651589024000
	Remove
3	Remove retaining lock (1)	 Retaining lock	*651589024000
	Install
4	Install starter	MODEL 447 with ENGINE 651 without CODE ZG2 (Permanent all-wheel drive)	AR15.30-S-7100E
		MODEL 447 with ENGINE 651 with CODE ZG2 (Permanent all-wheel drive)	AR15.30-S-7100EA

Remove/install retaining lock for crankshaft/ring gear

Remove/install retaining lock for crankshaft/ring gear

Remove/install retaining lock for crankshaft/ring gear

651 589 00 40 00

Counterholder

651 589 02 40 00

Retaining lock

651 589 07 40 00

Counterholder

참조 문서