ar0330p5000qbs

Remove/install retaining lock for crankshaft / ring gear

유형 ar · 주제 03.30 · 버전 0100 · 2007-07-09

적용 대상: ENGINE 156.982 in MODEL 209.377 with CODE (P98) Black Series

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 03 파워트레인 › 03.30 플라이휠, 드라이버 디스크, 진동댐퍼, 플라이휠 링기어 — 시리즈 156 (모델 982) · 시리즈 209 (모델 377)

EinPAS 15 엔진 › 15.15 연소 엔진 전체/엔진 블럭/크랭크 어셈블리 › 15.15.41 크랭크샤프트/플라이휠/클러치 디스크 — 시리즈 156 (모델 982) · 시리즈 209 (모델 377)

AR03.30-P-5000QBS

Remove/install retaining lock for crankshaft / ring gear

27.6.07

ENGINE 156.982 in MODEL 209.377 with CODE (P98) Black Series

Remove/install retaining lock for crankshaft / ring gear

P03.30-2144-07

01 Retaining lock

2 Cap

1 Nuts

Installing, removing

Danger!

Risk of death caused by vehicle slipping or toppling off the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

Danger!

Risk of injury caused by moving parts that can pinch, crush or, in extreme cases, even sever extremities.

No parts of the body or limbs should be within the operating range of the mechanism when moving components.

AS00.00-Z-0009-01A

1

Unscrew nuts (1) and remove cap (2)

2

Insert retaining lock (01)

Slide retaining lock into opening (see arrow) and allow to latch into ring gear. If required, continue turning engine at center bolt on the crankshaft in direction of rotation of the engine.

*112589034000

3

Remove in the reverse order

Remove/install retaining lock for crankshaft / ring gear

Retaining lock

112 589 03 40 00

참조 문서