AR03.30-P-1600FB | Removing/installing the belt pulley/vibration damper | 3.2.05 |
ENGINE 122.950 in MODEL 454.0
1 Poly-V-belt
2 Belt pulley
3 Bracket
4 Bolt
P03.30-2113-03
| Removing/installing | ||
1 | Remove alternator poly-V-belt | ||
2 | Lay poly-V-belt (1) around the belt pulley (2) and fix in place with a cable tie (arrow) | Do not use anything other than the vehicle's own poly-V-belt (1) since this could damaged disassembling the belt pulley (2). | |
3 | Lead poly-V-belt (1) over the bracket (3) | ||
4 | Remove bolt (4) through the access opening in the fender liner | Installation: Clean bolt (4) and the tapped hole in the crankshaft. Coat bolt thread (4) with engine oil. The poly-V-belt (1) with cable tie (arrow) must be moved through 180° to tighten the bolt (4) on the belt pulley (1). | |
| |||
5 | Remove belt pulley (2) | ||
6 | Install in reverse order |
Flywheel, driven plate, vibration damper, starter ring gear