W03.20-1163-12
Shown on vehicle with code (Z90) Vehicle, capable of fording up to 1195 mm
1 Radial shaft sealing (only on vehicles with code (Z90) vehicle, capable of fording up to 1195 mm or with code (Z69) vehicle, capable of fording up to (1500 mm)
2 Radial shaft sealing ring
3 Crankshaft
Modification notes
29.9.09 | Remove radial shaft sealing ring; altered. | Step 2.1 | |
Remove radial shaft sealing rings; altered. | Step 2.2 |
| Removing | ||
1 | Remove belt pulley/vibration damper | ||
2.1 | Remove radial shaft sealing ring (2) | Vehicles without code (Z90) vehicle, capable of fording up to 1195 mm or without code (Z69) vehicle, capable of fording up to 1500 mm | |
2.2 | Remove radial shaft sealing rings (1, 2) | Vehicles with code (Z90) vehicle, capable of fording up to 1195 mm or with code (Z69) vehicle, capable of fording up to 1500 mm | |
| Checking | ||
3 | Check flange on crankshaft (3) for galling of the radial shaft sealing rings (1, 2) | Replace crankshaft (3) if necessary. | |
| Install | ||
4.1 | Install new radial shaft sealing ring (2) | Vehicles without code (Z90) vehicle, capable of fording up to 1195 mm or without code (Z69) vehicle, capable of fording up to 1500 mm | |
| |||
4.2 | Install new radial shaft sealing rings (1, 2) | Vehicles with code (Z90) vehicle, capable of fording up to 1195 mm or with code (Z69) vehicle, capable of fording up to 1500 mm | |
| |||
Lightly grease sealing lip of radial shaft sealing ring (1). | |||
5 | Install belt pulley/vibration damper | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
6 | Start the engine and run it at varying speeds | ||
7 | Stop engine and check for leaks in the area of the radial shaft sealing ring (1) or the radial shaft sealing ring (2) for leaktightness | Visual inspection. |
Assembly tool
904 589 04 15 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1062-06A | Lubricating grease, Olista Longtime, DB supply specification 6804.60 | A 001 989 36 51 10 |
참조 문서
- ar0320w300001r
- ar0320w300001ra 전방 크랭크 샤프트 래디얼 실링 링 장착
- ar0320w300002r
- ar0320w300002ra 크랭크 샤프트의 전방 래디얼 샤프트 실링 링 탈거
- ar0320w4351r
- ar0330w1600r
- as0000z000501a 엔진이 작동 중인 상태에서 급발진에 의한 사고 위험 시동 또는 구동 중인 엔진 근처에서 작업할 때 차량에 부딪히거나 열에 의한 상해 위험