ar0320w0002r

Additional testing during an engine repair on the crankshaft, on main bearing and connecting rod bearing

유형 ar · 주제 03.20 · 버전 0100 · 2009-02-24

적용 대상: ENGINE 926.9 in MODEL 949

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 03 파워트레인 › 03.20 크랭크샤프트 — 시리즈 949

EinPAS 15 엔진 › 15.15 연소 엔진 전체/엔진 블럭/크랭크 어셈블리 › 15.15.41 크랭크샤프트/플라이휠/클러치 디스크 — 시리즈 949

엔진/변속기에도 적용: 926 9**

AR03.20-W-0002R

Additional testing during an engine repair on the crankshaft, on main bearing and connecting rod bearing

28.1.09

ENGINE 926.9 in MODEL 949

Checking

1

Remove oil filter element and check slats of oil filter element from outside for metal abrasion and swollen condition

Only if there is advanced wear or damage to engine components.

Engine oil and filter change

AP18.00-W-0101R

2

Replace oil-water heat exchanger

Only if there is metal grit on the oil filter element lamella or in the engine oil circuit.

AR18.30-W-6840R

3

Remove oil pump, disassemble and check for wear and damage by means of a visual inspection

Only remove if reinforced metal abrasion was found at oil filter element.

AR18.10-W-6020R

4

Fill engine oil circuit

Only if engine was repaired due to damage to crankshaft.

AR18.00-W-1600R

5

Replace engine oil and oil filter element

If metal abrasion or swollen condition of oil filter element (coolant in engine oil circuit).

Engine oil and filter change

AP18.00-W-0101R

참조 문서