ar0320s3063e

Replacing rear crankshaft radial seal

유형 ar · 주제 03.20 · 버전 0100 · 2013-11-25

적용 대상: MODEL 447 with ENGINE 651

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 03 파워트레인 › 03.20 크랭크샤프트 — 시리즈 447 · 시리즈 651

EinPAS 15 엔진 › 15.15 연소 엔진 전체/엔진 블럭/크랭크 어셈블리 › 15.15.41 크랭크샤프트/플라이휠/클러치 디스크 — 시리즈 447 · 시리즈 651

AR03.20-S-3063E

Replacing rear crankshaft radial seal

11.11.2013

MODEL

447 with ENGINE 651

Replacing rear crankshaft radial seal

1

Radial shaft sealing ring

2

Crankshaft

D03.20-1144-06

Remove

1

Remove flywheel or driven plate

AR03.30-S-8001E

2

Use a screwdriver to press out radial shaft sealing ring (1).


Use a suitable, soft base (e.g. rag) between the screwdriver and the crankshaft (2).
Damage may occur otherwise.

Install

3

Install radial shaft sealing ring (1) using an insertion device

AR03.20-S-3063-01E

Insertion tool

*651589016100

4

Install flywheel or driven plate

AR03.30-S-8001E

5

Check oil level, adjust to correct level if necessary.

Low SPAsh multigrade service engine oils (specification 228.51)

BB00.40-P-0228-51A

Low SPAsh multigrade service engine oils (specification 229.31)

BB00.40-P-0229-31A


The oil level must not lie above the maximum marking.
Engine damage can occur otherwise.

Check

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Check for leaktightness with engine running

Visual inspection only.

Replacing rear crankshaft radial seal

651 589 01 61 00

Insertion tool

참조 문서