시리즈
ko
ar0320g4803dd
Remove/install crankshaft sprocket
유형 ar · 주제 03.20 · 버전 0107 · 2019-10-04
적용 대상: Engine 900.91/92 in model 000.001 Engine 902.91/93 in model 000.001 Engine 904.94/95/96/97 in model 000.001 Engine 906.90/93/94/95/96/98/99 in model 000.001 Engine 924.91/93/94 in model 000.001 Engine 925.9 in model 000.001 Engine 926.91/92/93/95/97/98 in model 000.001
“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.
위치
기능 그룹 1 엔진 › 03 파워트레인 › 03.20 크랭크샤프트 — 시리즈 000 (모델 001) · 시리즈 900 (모델 91*, 92*) · 시리즈 902 (모델 91*, 93*) · 시리즈 904 (모델 94*, 95*, 96*, 97*) · 시리즈 906 (모델 90*, 93*, 94*, 95*, 96*, 98*, 99*)
EinPAS 15 엔진 › 15.15 연소 엔진 전체/엔진 블럭/크랭크 어셈블리 › 15.15.41 크랭크샤프트/플라이휠/클러치 디스크 — 시리즈 000 (모델 001) · 시리즈 900 (모델 91*, 92*) · 시리즈 902 (모델 91*, 93*) · 시리즈 904 (모델 94*, 95*, 96*, 97*) · 시리즈 906 (모델 90*, 93*, 94*, 95*, 96*, 98*, 99*)
EinPAS 15 엔진 › 15.17 엔진 컨트롤 › 15.17.34 체인 드라이브/톱니 벨트/기어 휠 드라이브 — 시리즈 000 (모델 001) · 시리즈 900 (모델 91*, 92*) · 시리즈 902 (모델 91*, 93*) · 시리즈 904 (모델 94*, 95*, 96*, 97*) · 시리즈 906 (모델 90*, 93*, 94*, 95*, 96*, 98*, 99*)
엔진/변속기에도 적용: 924 91*, 924 93*, 924 94*, 925 9**, 926 91*, 926 92*, 926 93*, 926 95*, 926 97*, 926 98*
AR03.20-G-4803DD
Remove/install crankshaft sprocket
15.08.2019
Engine
900.91/92 in model 000.001
Engine
902.91/93 in model 000.001
Engine
904.94/95/96/97 in model 000.001
Engine
906.90/93/94/95/96/98/99 in model 000.001
Engine
924.91/93/94 in model 000.001
Engine
925.9 in model 000.001
Engine
926.91/92/93/95/97/98 in model 000.001
1
Crankshaft gear
2
Crankshaft
3
Dowel pin
4
Centering drifts
5
Camshaft sprocket
Caution
Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil
Wear protective gloves, protective clothing and safety glasses.
AS18.00-Z-0001-01A
Topical note
Notes on avoiding damage through contamination and foreign objects
AH00.00-N-5000-01H
Notes on work safety regulations for vehicles with natural gas-powered engines
AH00.10-N-1000-04A
Remove/install
1
Remove timing case.
AR01.60-G-8200DD
2
Turn crankshaft (2) until the markings (arrows) of the crankshaft gear (1) and camshaft sprocket (5) coincide.
Screw centering drift (4) into two opposing threaded holes on the crankshaft (2) and turn the crankshaft (2) using a suitable lever.
Alignment punch
*904589026300
3
Pull crankshaft gear (1) off the crankshaft (2).
Installation: Markings (arrows) on crankshaft gear (1) and camshaft sprocket (5) must be positioned opposite each other.
4
Check dowel pin (3) for wear.
If wear is present,
replace dowel pin (3).
5
Install in the reverse order
참조 문서
