ar0320g3004dd

Remove/install front radial shaft sealing ring on crankshaft

유형 ar · 주제 03.20 · 버전 0101 · 2019-11-21

적용 대상: Engine 900.91/92 in model 000.001 Engine 902.91/93 in model 000.001 Engine 904.94/95/96/97 in model 000.001 Engine 906.90/93/94/95/96/98/99 in model 000.001 Engine 924.91/93/94 in model 000.001 Engine 925.9 in model 000.001 Engine 926.91/92/93/95/97/98 in model 000.001

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 03 파워트레인 › 03.20 크랭크샤프트 — 시리즈 000 (모델 001) · 시리즈 900 (모델 91*, 92*) · 시리즈 902 (모델 91*, 93*) · 시리즈 904 (모델 94*, 95*, 96*, 97*) · 시리즈 906 (모델 90*, 93*, 94*, 95*, 96*, 98*, 99*)

EinPAS 15 엔진 › 15.15 연소 엔진 전체/엔진 블럭/크랭크 어셈블리 › 15.15.41 크랭크샤프트/플라이휠/클러치 디스크 — 시리즈 000 (모델 001) · 시리즈 900 (모델 91*, 92*) · 시리즈 902 (모델 91*, 93*) · 시리즈 904 (모델 94*, 95*, 96*, 97*) · 시리즈 906 (모델 90*, 93*, 94*, 95*, 96*, 98*, 99*)

엔진/변속기에도 적용: 924 91*, 924 93*, 924 94*, 925 9**, 926 91*, 926 92*, 926 93*, 926 95*, 926 97*, 926 98*

AR03.20-G-3004DD

Remove/install front radial shaft sealing ring on crankshaft

20.11.2019

Engine

900.91/92 in model 000.001

Engine

902.91/93 in model 000.001

Engine

904.94/95/96/97 in model 000.001

Engine

906.90/93/94/95/96/98/99 in model 000.001

Engine

924.91/93/94 in model 000.001

Engine

925.9 in model 000.001

Engine

926.91/92/93/95/97/98 in model 000.001

Remove/install front radial shaft sealing ring on crankshaft

1

Radial shaft sealing ring

2

Crankshaft

W03.20-1170-12

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Danger

Risk of explosion due to escaping combustible gas or overheating of gas cylinders.Risk of injury caused by burns to skin and eyes. Risk of frostbite to body parts caused by escaping gas and by touching components near the valves when emptying gas cylinders. Risk of poisoning or suffocation caused by inhaling gas.

Remove any sources of ignition.
Protective clothing, safety gloves and safety glasses must always be worn.
Ensure that the work area is adequately ventilated.
When working on vehicles at ambient temperatures over 60 °C, all gas cylinders must be removed.

AS00.00-Z-0018-01A

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-N-5000-01H

Notes on work safety regulations for vehicles with natural gas-powered engines

AH00.10-N-1000-04A

Remove

1

Remove vibration damper.

AR03.30-G-1600DD

2

Remove radial shaft sealing ring (1).

AR03.20-W-3000-02RA

Check

3

Check flange on crankshaft (2) for galling of radial shaft sealing ring (1).

If galling is detected on the flange:

Replace crankshaft (2).


AR03.20-G-4351DD

Install

4

Install a new radial shaft sealing ring (1).

AR03.20-W-3000-01RA

Assembly tool

*904589041500

5

Install vibration damper.

AR03.30-G-1600DD

6

Start engine and allow it to run with alternating engine speeds.

See information from body manufacturer.

7

Switch off engine and check around radial shaft sealing ring (1) for leak tightness.

Visual inspection.

Remove/install front radial shaft sealing ring on crankshaft

904 589 04 15 00

Assembly tool

참조 문서