AR03.10-W-0002R | Additional test works during an engine repair on piston/connecting rod and on cylinder barrel | 28.1.09 |
ENGINE 926.9 in MODEL 949
| Checking | ||
1 | Remove oil filter element and check slats of oil filter element from outside for metal abrasion and swollen condition | Only if there is advanced wear or damage to engine components. | |
| Engine oil and filter change | ||
2 | Replace oil-water heat exchanger | Only if there is metal grit on the oil filter element lamella or in the engine oil circuit. | |
3 | Remove, check and replace oil spray nozzle, if necessary | Only if piston was damaged. | |
4 | Remove oil pump, disassemble and check for wear and damage by means of a visual inspection | Only removed if an increased amount of metal grit was found on oil filter element lamella. | |
5 | Replace engine oil and oil filter element | If metal abrasion or swollen condition of oil filter element (coolant in engine oil circuit). | |
| Engine oil and filter change |
참조 문서
- ap1800w0101r 엔진 오일 교환 및 오일 필터 교체
- ar1800w4000r
- ar1810w6020r
- ar1830w6840r