I01.60-0001-06
1 Screw
2 Timing case
3 Shear bolt (only in the case of adjustable crankshaft angle position sensor)
4 Holder for crankshaft angle position sensor (only for an adjustable crankshaft angle position sensor)
5 Dowel pin
7 Screw
8 Oil pan
9 Radial sealing ring
10 Flywheel
B15 Crankshaft angle position sensor
M1 Starter
| Remove/install | ||
1 | Remove starter (M1) | ||
2 | Pull out crankshaft angle position sensor (B15) | Installation: Press crankshaft angle position sensor in as far as stop. | |
3 | Remove bracket for crankshaft angle position sensor (4) | Only for an adjustable crankshaft angle position sensor (B15). | |
4 | Remove flywheel (10) | ||
5 | Remove radial sealing ring (9) | Installation: Install new radial sealing ring. | |
6 | Remove further detachable parts on timing case (2) | ||
7 | Remove oil pan (8) | ||
8 | Remove timing case (2) | Remove sealant residue from the attachment flange of the timing case. Installation: Check the timing case for damage; replace if necessary. Coat attachment flange for timing case with sealant. | |
| |||
| |||
9 | Install in the reverse order |
Timing case
Number | Designation | Engines | |
BA01.60-N-1001-01A | Bolt, timing case to crankcase | Nm | 50 |
BA01.60-N-1002-01A | Inspection hole closure cover to timing case | Nm | 25 |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1009-01A | Sealing compound Loctite 574, 50 ml | A 001 989 89 20 10 |