1 | Oil pan bottom section |
2 | Bolts |
2.1 | Screw |
3 | Oil pan |
S01.45-4547-06
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
| Remove/install | ||
1 | Drain/collect engine oil | ||
| Engine oil and oil filter change | ||
2 | Remove screws/bolts (2, 2.1) of oil pan bottom section (1) | Installation: Starting with screw/bolt (2.1), work in a clockwise direction to tighten the screws/bolts (2, 2.1) on the oil pan bottom section (1). | |
Bolt, oil pan bottom section to oil pan | |||
3 | Remove oil pan bottom section (1) | ||
Notes on sealant path for oil pan | |||
| |||
Installation: Apply sealant. | |||
Sealant, Loctite 5970, 50 ml | |||
Blade | |||
Mounting wedge | |||
| Clean | ||
4 | Clean sealing surface at oil pan (3) and oil pan bottom section (1) | ||
Loctite 7200 | |||
Loctite 7063 (400 ml) cleaning spray | |||
5 | Install in the reverse order | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
6 | Check for leak tightness with engine running | Visual inspection only. |
110 589 03 59 00
Mounting wedge
122 589 00 28 00
Blade
참조 문서
- ah0145n000101we 오일팬 실런트 경로 지침
- ap1800s0101p 엔진 오일 교환 및 오일 필터 교체
- ar0100p005001a 실런트를 제거하십시오.
- as0000z000501a 엔진이 작동 중인 상태에서 급발진에 의한 사고 위험 시동 또는 구동 중인 엔진 근처에서 작업할 때 차량에 부딪히거나 열에 의한 상해 위험
- as0000z001001a 리프터에서 차량이 미끄러지거나 틸팅 시 생명의 위험