Inspection data of crankcase
Number | Designation | Engine | ||
BE01.40-N-1013-02B | Crankcase flatness of separating surface | over the entire length | mm | 0,030 |
over a length of 150 mm in longitudinal and transverse direction | mm | 0.015 | ||
D01.30-0052-01
1 Use straightedge (2) to inspect flatness of crankcase contact surface (1) over its entire length.
2 Check variation with a feeler gage.
Only if there is a visible chink of light. It must not be possible to insert the feeler gage between crankcase contact surface (1) and straightedge (2). If inspection is carried out in the transverse direction, the permissible variation stated is merely a reference value and cannot be measured.