Cylinder head
Number | Designation | Engine | Engine | |||
BA01.30-N-1008-01K | Bolt, pressure differential sensor holder to cylinder head | Nm | 9 | 9 | ||
D01.30-1077-12
The complete work procedure is shown on vehicle as of 1.9.10 with transmission 711.
1 Remove electrical wiring harness (2) on bracket (1) or on bracket (9).
For vehicles as of 1.9.10 the bracket (9) is also installed.
Installation: Install new cable ties.
2 Undo screws (7) and remove bracket (9).
On vehicles as of 1.9.10.
3 Remove electrical wiring harness (8) from bracket (1).
Installation: Install new cable ties.
4 Remove bolt (3) on bracket (1).
For vehicles without code (MP5) Engine version Euro 5.
D01.30-1074-06
5 Unscrew bolt (4) from bracket (1) and remove retaining plate (5).
6 Remove oil dipstick guide tube from bracket (1).
For vehicles up to 31.8.10 with transmission 722.
7 Undo screws (6) and remove bracket (1).
Installation: Observe tightening torque.
8 Install in the reverse order.